|
|
|
|
Home > Articles & Tips Index > Model Design > 7035 Psyko Camber/Reflex Setup [Courtesy of John Roe Sensei_John_Roe "at" compuserve.com, August 1999] Message text written by "Eugene Heggen" >Does anyone know if the 7035 airfoil benifits from trailing edge reflex and I am currently using a Psyko as my #1 TD/F3J ship. I got mine going the weekend before team selection in New York, and I liked it enough to fly it all 20 rounds there. I'm not an expert on these rhings, but here's what I'm using, with some success- 1/16" reflex- GOTTA have this, "slope-tested" ;-) 3/16" camber on slider, about an eighth inch at the detent, which is all I usually use- but sometimes I like more, I use the camber slider almost like another control at times- something I've learned from hand-launch... 3/16" Camber-to-elevator, always on. (however I only use a tiny amount of available elevator, so the only time all this mix would happen would be a pylon- turn, or possibly pulling up for the zoom, or coring a tiny, nuclear thermal or...hey no wonder I love mixing!) Anyway, your milage my vary, but I am very, very happy with how my Psyko flies, definetely a fun toy... John Roe Laguna Hillls, Ca |
|
|
